OK put old carb back on after taking the little vaccum thing off of new one remount carb, Jeep Starts idle is a littla rough but put new fuel pump...
OK as always I start with one thing end with another. I pulled the Carb and went to install the new one the PO gave me with the Jeep. I ordered a...
I just ordered a new fuel pump for 40 bucks its worth a shot any tips on instalation anything to look out for i have the FSM but any info is great.
OK i have not had time to start my CJ5 for about 6months, I went to start it today and I can get it to turn over for about 30 seconds when i dump...
did not think of it happen to have the service manual next to me sorry:oops:
If you pm me your email i can send you a copy of the wirring diagram, i scanned it in but the file is to large to post.
I have a stock 4 blade fan and spacer that i got from Vangaurd that i did not use i can send it to you for shipping if you need it.
looks great:cheers:
Do you have much experience with any of his products some of the stuff looks preety good
I may have found a place for this tie rod set up it is call ed Rustys off road i sent him some pictures and he said he can make it work they all...
Just do what Warloch said just start the small drill bit off center of the hole you alredy drilled
OK i believe that but what does a beginer mechanic do to recreate this scenario :mad::evil::mad: OH yea yes you are correct on the brave and re...
If you know the size and thread pattern of the bolt you could drill the screw with the required bit size, if you do it dead center and go slow you...
Ok if you look at the first pick it would appear that the new tie rod in my hand would be perfect, only one problem i need to turn it over and...
OK so the commando is oppisite from stock, i appriciate the info :) do you know who may stock that tie rod:):beer:
The problem is that the taper for the drag link goes in the wrong direction along with the bend is exactly oppiste i have a stock tie rod end but...
I am using the tie rod with the extra hole i thought about the 2 hole knuckle but probably wind up doing a tie rod flip on that also so trying to...
OK round 2 with steering, I now know that i have a tie rod flip with saginaw steering upgrade on my 68 cj, my question is if anyone knows if there...
Did you need one side or both i may have one side in the box o' parts i will look tonight
I do not know if this is the right spot for this but would like say :stout: for all that helped me make the madien voyage of my cj a succes, it...
Separate names with a comma.