One suggestion; if you do use the flush (I have and recommend it) take off the lower radiator hose to drain, don't use the drain plug. If you...
I put an electric pump on mine...but for a different reason.....had a problem getting the old carter to prime before winding the battery down....
Just my 2 cents:roll: Do you do alot of offroading? I have headers on my 89 Wagoneer.....I have to constantly tighten and/or change gaskets...
Looking at a '59 CJ5 that has a shift pattern for a 4 speed and seller says it is a T 98. However, this resource:...
Congrats! You showed em what the "original" 4x4 can do!
Yea, you are right....alittle crazy..:drool: I once towed a gooseneck trailer loaded with a M35A2 (trailer and truck @ about 18,000+) with a...
Thanks for the info. I was really trying to determine if it is OE or an aftermarket product.
I am not familiar with the powerlock. I know alittle about the gov-lock having dealt with some military vehicles. Is it a decent LS? (if...
I am posting so many questions because I am purchasing additional jeeps: '46 CJ2A (see my post in Flat Fender); and a '62 CJ5 stock. The present...
Is any modification necessary to put a '41-'45 Grille in a CJ2A? Any suggestions on a good or best aftermarket source for MB Grille? Any...
To the admin: Sorry, I certainly did not mean to break the rules....I will know better from here forward..... '60 is unmolested (except for...
Hi guys... I am new to posting on this forum but have read it for a long time. I would like to tow a 2500# trailer (unloaded) with a '60...
Thanks timgr... Following this thread, I think I will take some good advice and have the oil pressure tested on a separate gauge for my 258's....
Thanks for the welcome Timgr! Not sure what you meant when you said "doubt that story":roll: assume you meant that you doubt my mechanic knew...
My 258 in a 1980 CJ has idle pressure of about 5-8 psi and cruising pressure of 20. No tics, lifter noise, etc. Took it to my mechanic and he...
Separate names with a comma.