My '71 Dauntless CJ5's clutch makes an awful noise when depressed. Throw out bearing?
Thanks for the input. I was using original column with round/DD u joint. Having T/S and 4 way problems, thought new column could make things better.
I have a '71 cj5 with saginaw manual conversion. What length hot rod tilt column do I order?
Yellow = Left, Green = Right
Just a parts donor no need to steer it. Is the '77's frame wider, I took the D27 out and bolted in the D30 from a '76. Had to do something to...
My '77 has the 6 bolts and thick calipers. Another question, will my original D 27 axle bolt on to the '77 so I have a roller. This way I can...
Knuckles, meaning ball joint removal or just spindles?
My '71 has a D 30 with 11 X 2 drum brakes. I have a '77 D 30 with factory discs. The '71 axle is 3:73 while the '77 is 3:54, don't want to...
YJ axles aren't an upgrade! Front D30 has driver's side drop and axle disconnect (no locking hubs), D35 is iffy vs AMC 20. Jeep CJ D44 better....
I have a Howell kit for my '84 CJ7 with an adaptor for the factory Carter 2bbl. Maybe this adaptor could be made to fit a 2G manifold. Just my $...
I bought a set of fender flares for my '71. Here's the problem: They have mounting holes on the back side, how do I get them clamped in the...
Thanks, I'll adjust cable for a start. David
Yes, just started this. Earlier only after an hour's drive, now even when cold. I've been driving this vehicle for 10 yrs. This is a new problem!
It won't shift with engine running, fine when off. Do I have too much clutch or not enough? What else? Thanks, David
Does anyone have a source for the factory switch? The one on my 71 is inop.
For horn on Ross column I used parts from M38. 2 pieces a brass disc that is a tight fit on the steering shaft and sheet metal piece that screws...
Plug socket for military trailer.
I got a phone call from the company that sent the installer yesterday. He said he was sending a more experienced tech, 2 guys came and put the...
Yeah Glenn, He did mention gluing it in.
Thanks Daryl, see above post.
Separate names with a comma.