You need to ask the Boys on "The CJ2A Page" if anyone can ans a question about 2a's it's them. Doug VEC 1946 2A
I used the hood and grille. the latest pic without the home made shackles, some new sneakers, an electric fan and you can't see it but she is...
I did it and like the looks. [IMG][/URL][/IMG]
The little vent holes at the outer end of the axle housing only vent the bearing when grease is pumped in. You see on the older housings that have...
Ok I did a F.A.Q. and a search and came up empty handed, or was that empty headed:? ? I want to do a power steering conversion on my 61 CJ5. My...
Thanks; Doug
I have a 1960-ish CJ5 and want to put disc brakes on the front. I read the tech by Steve Lane on disc brake conversion and have run into a...
One more thing, seeing you are a little green. The disttributor needs to be installed unlike any other dist out there. Read this....
I had the same noise, drove me crazy!!! thought it was the fuel pump, got an electric pump and covered the hole, not!! still had the noise. I took...
I think the plug you are referring to plugs into the cap. There should be a place under your cap near the spark plug wires for three...
Put the L4 in it and send ME the six and the SM420 R) LOL Just kidding, PUT THE SIX IN IT Doug
OK, seeing you went to all the trouble to help me I went back out to the shop and did the most accurate bench test I could do. I put the box in a...
Thanks, you and your pic's were very helpfull. I was able to figure out I have the smaller 4cyl box. The reason I removed it was due to very...
OK maybe it's too early to see the difference. They look the same to me other than one is a mini-me. Would it be possible to place a ruler across...
I have been told the Ross boxes differ between 4cyl and 6cyl models, the gear ratio is different, the 6cyl box is easier to steer. OK, my question...
Well if you want to get technical it is a 1/4 ton truck of sorts.
I agree with the others L head parts will fit. Do me a favor and check the inside of the timing cover from your F head. I seem to rember an indent...
They still make them, check with your local RV store. The folks just had one installed on the Dodge so they could tow it behind the home.
OK I will try and make this easy. Due to the balancing of the crank on the F head and the flywheel on the L head you need to keep the L head...
It's alot of work and parts to make the swap. I did it with mine, and it was a winter project. The best thing to do is what I did find a complete...
Separate names with a comma.