Some of the stitching in my soft top is pulling out but the rest of the top is in really good condition. Has anyone had to deal with this? Can...
Are there bump stops on a stock 72 CJ5? I have larger bump stops that appear to be from the 4" lift I took off. The bump stop is almost touching...
Well I finally got the CJ5 fired up today and just noticed that the driveshaft is sitting on one of the header pipes! I had taken a set of 4"...
I am trying to put my 72 CJ5 back to a stock rear tank setup. The previous owner put a under seat style tank in but it looks like there was...
I seem to have a Carter AFB on my 304 in my 72 CJ5. It seems this is a 4 barrel carb with a good deal of adjustability. I remember hearing...
I started working on getting my 72 CJ5 running and am having a strange problem. The CJ ran when I bought it and once I added some gas i was able...
Can anyone recommend an oil pressure gauge for my 72 CJ5 with the 304 that has a sender unit and gauge instead of the tube style? I was thinking...
My daughter, who will be driving the CJ when she is old enough really likes lime green for the color scheme. I have seen a couple of posts of...
Is there any reason to not use an electric fuel-pump in my 72 CJ5? I have one in my 69 Bronco and it works great. If I go with an electric pump...
Anyone know the length of the stock pitman arm on a 72 CJ5? I sold my 4" lift springs, shocks and shackles and need to determine if the pitman...
Need some input on bushing kits for my 72 CJ5 rebuild. I would like to replace all of the spring bushings, body mounts, etc. Any first-hand...
After getting a better look at my tub on my 72 yesterday I am thinking of just swapping on the 58 tub I have which is in much better condition....
I was looking at leaf springs on the JCW site and it looks like the leaf springs are the same for 55-75 for both front and rear? Does that mean...
What is the difference between a leaf pack with 9 leafs vs. 11? Is it primarily different to support added engine weight or is it for ride...
I am looking for input on anyone who has done this powertrain in an early CJ5. I have axles from a 68 Jeepster Commando with the rear Dana 44,...
I purchased what I think is a tub from a 1958 and the only tag I could find is on the drivers side, outside of the firewall with an "ID 42039...
My first post to this board. I have a new early CJ5 project I am putting parts together and I'm looking for a suitable powertrain. I have a 1960...
Separate names with a comma.