Thank you very much for the information. Todd.
Would anyone have a definitive answer on the backspacing on these wheels? I had a pair that I just sold and never took the measurement. I would...
Here are some pics of an Original '75 Brochure. Looks clear to me. Here is also a few shots of my '75 CJ5 with Amber lenses and Amber Bulbs,...
Yup, I agree. But I must say, my brother has an '86 CJ7 with a newly rebuilt 258 4.2, but with none of the mods I have on my engine, and it's...
I would also keep the 258. It's a 4.2 Litre engine, not a 4.0, in case you weren't sure. If you want, you could maybe rebuild it. I run that...
Okay, thanks for all your help. Todd.
Shouldn't be a problem with the tire clearance. I have 31's on it and a 2 1/2" suspension lift. It also looks like the original cushions are...
Try this site: http://www.luanjp.com/mods/electrical/GT1CheckFuse.asp
Hi, ya, thanks, but I want the truck lowered all the time so I can take the truck in and out of the garage whenever I want without a hassle....
Hi guys, I need to lower my '75 CJ5 about an inch to clear the garage entrance in my Condo. The truck currently has a 2 1/2" suspension lift with...
I would just check the torque. Should be about 90 foot pounds. You could also Re-Torque with Red Loc-Tite. Todd.
If you don't get it to go, let me now and I'll get you the Diode part number. I'll also look at my truck and tell you exactly how to hook it up....
I had the same problem when I first started the engine after the Painless Wiring install. The Diode worked, since it allows only a one way...
Yeah, this is the same guy that I got my wheels from. I guess he fixed his description for fitting over the 11" Drums. Look at the auction link...
I would have to agree. You have to have enough clearance. But remember, the holes on the Spacers where you bolt them to the Studs are...
Hi Rondog, the only Jeep Kelsey-Hayes Rims that are Riveted are the 15x8's that I have. But I also have the 15x6s and they are not Riveted. the...
Hi Boyink, well, since my truck is strickly a City truck, I'm not really worried about articulation. But I can tell you that I have no fender...
Hi Kodiak, well from what Iv'e read, 1 1/4" is the least that you can go and still have some type of safety. I'm not sure if you can buy Spacers...
I'm pretty sure that Kelsey-Hayes never made a Chrome Rim for a Jeep. Todd.
Don't forget, the Spacers also add an extra 2 1/2" to the width of the axels. So the truck just looks a lot more squatter, almost like a...
Separate names with a comma.