Hmmm, looks like I may have it wrong. The tranny parts came to me in the box along with the chassis (engine was still installed) and I was told...
Sorry, didn't realize you'd need your own OneDrive account when I posted these. This is the original T-14 from my 1970 CJ-5 Renegade chassis...
Sorry guys, when I shared it via OneDrive I didn't require a password but didn't realize you had to have a OneDrive account. Thanks for the...
I have a crate with parts from two T-14 transmissions. The parts includes two transmission cases, mainshafts, gears, synchros, and 1 top plate...
This hood will fit the early CJ-5 (55-71) with the shorter front clip. It includes the prop rod and hood tie downs but not the hood hinges. The...
Well, if there's some obscure, bizarre problem that can occur it'll find its way to me! :D Thanks, all. I'm gonna try annealing the washers...
Conundrum number 581... :banghead: I installed the brakes on my project months ago. Finally got the pedals installed and was preparing to bleed...
Thanks, everyone for the input. Sorry it took so long to respond... holiday and all. So I removed the distributor and measured the shaft...
Thanks for the measurements, oldtime! I'll pull it tomorrow and double check them. The engine is from a 1970 Renegade. Far as I know, my engine...
Hey, all. I just installed the CRT HEI distributor on my 225 odd-fire project and want to see if anyone else has run into the same issue. Let me...
Good to know, thanks. I saw some comments about manifold vs. port vacuum for distributor advance, but haven't got to the point of dropping in the...
I don't have a heater or power brakes, and I'm using electric rather than vacuum wipers. Looks like I'll just utilize one of these for my...
I'm getting close to finishing my years long build - a CJ-2A on a 1970 CJ-5 Renegade chassis. When I started it, the rolling chassis had been...
I got the aluminum high mount style. Actually, I believe that I can use the aluminum bracket I have or replace it with the one in the picture,...
I got very lucky and snagged the pump and brackets together on eBay... lucky because the pump pulleys seem really hard to come by, and when you...
Doug, After doing some measuring, it appears that the low style bracket would fit, but there would be zero clearance and it wouldn't allow for...
"What did you coat the aluminium bracket in?" piffey263, I used Seymour Hi-Tech Engine coating in Metallic Chrome Aluminum. <Link to pic:...
Thanks, everyone for the responses and pics - extremely helpful. Looks like I'll ditch the (partial) high-mount bracket. I like the low profile...
Walt, thanks a ton! Both of those make sense now that I have some context. ;-) jeepcj, I actually didn't find it in Ohio, I bought it from a...
Sorry, the image link was goofy. Here's the url: https://docs.google.com/file/d/0B2x5toB2Ge75QllMWGdqbkRZREE/edit
Separate names with a comma.