I have been absent here for a while. A few months ago I found the motavation to finish my jeep. I am pround to say that I am now almost finsihed...
I have a couple of questions. I have a 12 circut mini E-Z wire harness. I am finished running wires to the correct areas of the jeep. I am now...
A friend of mine just bought what he was told is a 55 m38a1. It is military and has a F134 in it. My question is the ignition system. Did the...
I am finishing up the rebuild on my front axle and noticed I had 2 sets of Selectro Hubs. One of which is slightly larger and "Heavy Duty" is...
When using hard tubing where you have to join two pieces togeather. What kind of thread sealer do you use? Is teflon tape OK, or do you need to...
Some of this will be repetitive for some of you, here's the story. I purchased my cj6 from a local car lot about 18 months ago. It had to be...
Does the double military wrap on the end of the spring go to the shackle, or does it go to the fixed spring hanger? Thanks:beer:
I need some help, here goes the long story. The cj6 I bought came with 2 trans housings, a T-90 and a T-86. The T-90 gears are in the T-86...
I have taken out my factory under seat tank and want to install a rear poly tank. I have cut the braces for the drawbar out and soon will be ready...
Hey everbody. I am in the middle of rebuilding a 67 CJ6 and ran across a deal on a CJ2A. I think it will start but, the bendix on the starter is...
Separate names with a comma.