Here in the SoCal mountains a lot of people use "studded tires". I understand that they are legal from Oct - March or so. You may want to check...
I'm gonna jump onto Clay's thread here. I hope you're OK with that... I'm glad you got your issue fixed.... My hubs are not locking since I...
Niiiice!
Get on the freeway and drive next to a friend who has stock tires. Ask (yell) how fast he's going, and compare your speedo...R)...
I'm running BFG Mud 33 x 12.50's w/ 4" springs, 1" shackles and 1" body lift, and I just put wide track axles in. I'm happy with the tires,...
The Rear is a D44 form a '66 Scout, (I had to order custom chrome moly shafts from Dutchman Axle), The front is a D30 form a '85 CJ-7 w/ an ARB...
Thanks for the help! I'm not sure if you saw the picture, but that's how I got it.... in a box. I can usually put things back together if I...
The clutch lever on mine pivots on a metal ball, and there is a little play. (Not to say that it's right.) I had a "buzzing" sound at...
OK. So these seals go toward tie inner side of the housing. Are there supposed to be any seals at the ends of the housing? I'm thinking not....
Where do these seals go?? [ATTACH] When I got this axle it was in pieces. [ATTACH] I've gotten it this far but I'm not sure where these seals...
http://www.myjeeprocks.com/feature/scoutdana44.php I haven't finished my swap yet, but this guy's seemed to work out well. I had a heck of...
I've never had a hard top on mine but I can't see a soft top being any quieter.......... flapping in the wind at highway speeds gets pretty noisy....
http://www.quadratec.com/cgi-bin/sgsh0101.exe Is this what you're looking for? That link won't take you directly to it but if you search for...
I think the "Golden Eagle" was basically a trim option offered from around '77-'82 or so. Unless maybe it had the rear dana 44 axle, but...
I see your point........But it's gotta help.
I bought my Jeep with 33's at stock height. The tires were binding up inside the rear wheel wells somethin' fierce. After a lift, the problem...
What about a little more lift?? I didn't see any mention of it but maybe a 1" body lift would help. Easy to install and cheap. No loss of...
Good Job! Have you tried fitting it in the garage yet?
Congrats on your new lift! I know how you feel. I saved change in a piggy bank for mine. The biggest problem I had was getting the pitman arm...
Well, I added 2 quarts of blinker fluid and that didn't fix it.R) I've been tracing the wires and checking grounds. I'm scared to mess with...
Separate names with a comma.