Thanks for the input. I'll try and cross reference with the Spicer joints and post any findings.
I put a DJ steering column from postal jeep in my CJ when I did my power steering swap. Not sure exactly what year it was from, but it's the same...
My 71 had reverse chatter as well. Home-made lever/rod clutch linkage that was tight. My fix? Had the flywheel resurfaced. Smooth and no...
^^x100. That's not going to be the only frame rot you have. I would question the integrety of the entire frame now that I've seen that one pic.
They look repariable to me. If your not wanting a show jeep, I wouldn't even consider finding another one. I wish my fenders looked as good as...
No, I'm not on crack, but maybe I should be for thinking this..... I have an old freezer that is rust free, and I'm needing some flat sheet...
In my experience, you'll see your best gas mileage when you use limited throttle and maintaine a steady speed........which is not what you should...
Well crap. Got a picture of the port side on this one, and it's different (square). Is this manifold different enought that it won't bolt up at...
Thanks kaiser krawler. This one will only be about $35 bucks shipped, so that seems like the better deal right now if it will work. I sent a...
I don't have a picture of the port side, but I'll see if they can get one. It looks correct from the front (bolt holes look like they are in...
Great. Do you have a power or manual saginaw? Any clearance issues with your steering shaft?
Going off your pictures and my memory, it looks like your bows are mounted to the tub too far forward. I agree that you need to check out the...
I've made the saggy swap on my 71 with the 225, but now I'm getting really tired of my headers and want to go back to standard exhaust manifolds...
Also, how much did it cost?
Check out the pics on the last page of the Saginaw steering sticky thread. http://www.earlycj5.com/forums/showthread.php?t=17911&page=5...
Nothing really new here, but this is how I did mine. Parts: P/S Pump Bracket from a pick-n-pull (they had a pile of them, and I picked the...
I wouldn't even call it a switch. It's a hand operated pump. You pull it back and forth to pump the water out of the nozzle on the cowl. I've...
X3 on degreed shims (not just spacers). I've got the exact same setup as you (purchased from Herm), and I got some shims for the front axle....
I tried the sound deadening material on the tranny hump and I also had a thick rubber floor mat that went all the way across the front passenger...
Another vote for option #1. I've got one, and it does a pretty good job. You just need to practice with it a bit to get the hang of it. It...
Separate names with a comma.