So I got a puller on lend and couldn't get the hubs on my tapered d44 to budge. So I called up R&P and ordered a 71 d44 with an OX locker and...
Hey guys, I was smart enough to snap off both bleeder screws on my d44 in my cj5. As an option I found a d25 and d44 out of a 1960 cj with new...
Hey guys looking for an easy way to get my 68cj5 back on the road. Would a Delco 10si and wiring kit form here:...
So I got my 11 inch brake kit for the front axle on my 68 cj5. I was just wondering how to minimize my exposure to the asbestos both in the new...
Thought I would post this as a friendly reminder to everyone that you should check your rear shackle mounts. Mine look good, it's the frame that's...
Hey guys after getting my power steering installed I for the toe in as close as i could and drove the 68 down to the alignment shop to get it...
Hey guys, I finished my power steering install just in time to be told by my landlord that, surprise, I need to move. It actually a good thing...
Hey guys, I'm going to be finishing up my Herm's power steering install today but I've got a snag. The brake lines for the front had to be cut...
Hey guys, I've been searching and haven't found the correct diameter for the bell crank shaft on my 68 cj5. I'm thinking I'll need the 1 1/8th...
Hello everyone. After a bunch of reading I've come to think that a power steering conversion for my 68 cj5 is way out of my league. I checked with...
Greetings, as some of you know I drove this 68 cj5 home last week and have been goofing around town in it. One thing that bothers me is the...
Separate names with a comma.