http://www.pertronix.com/ Might want to give these a look.
Here ya go. http://www.stagewest4x4.com/store2/store/pops/bolt-pattern.htm
The '79 axle I got was out of an automatic CJ, so instead of lock out hubs it had drive flanges, which are great for a trail fix if you blow a hub.
I cheated and found a complete disc brake equiped 1979 Dana 30 from a CJ for a $100, simply swapped everything from the knuckles out, and ended up...
I have about 50psi at start up, after shes warms up it drops to around 30psi at idle.
There's a special tool to pull it off, I got mine at a parts store for $20 I think. Jeff
opps, I'm sorry, the rear axle I have is out of a Grand Waggy, not a Cherokee.
Not all the Cherokee's had an offset rear 44, I have one out back that has a centered pumpkin, I believe it came off an '86, and a front off of an...
As far as I am aware the only transfer case used in 72-75 CJ's was the Dana 20, which does not (not suppose to anyway) have a two wheel low. You...
Whats the best way to see if a coil is operating properly? It's in a 1974 CJ-5 with a Pertronix ignition, which I left the key on and fried, got...
I ran a 4" Superlift w/ 33" TSL's and had to trim my rear fenders just a little to keep from rubbing. Problem was the articulation sucked, not...
Does anybody know of a transfer case disc e-brake kit for the Dana 20? I really like the concept but have not seen a kit for the 20. Jeff
Frame looks like a '72, and yep, thats a 44 in the rear.
I went to local 4x4 shop, bought a complete 1979 CJ dana 30 for $75, took it home and swapped from the knuckles out, took 2 hours or so. I run the...
Also, why upgrade to 11" drums when it's just as easy to do disc brakes up front?
I have 33x12.5" TSL's on 8 inch 2" backspaced wheels, with 6-8lbs of pressure offroad it would wear you out fast, on the road with 20lbs or so it...
I've run a lockright in the front on my '74 for years, (lincoln locker in the rear), and love it. On pavement I never run it in 4 wheel, it...
I took my old rusty tailgate off and bought a diamond plate wrap-around for $130 and put it on over the tailgate opening, 'course if you seen my...
I'm using 44's that measure 61" for the front and 58.5" on the rear, seems to me to be the perfect width for the kind of hardcore trails we have...
I had my 2100 rebuilt, it was a nasty looking site when I took it in. They bead blasted it, flow tested it, and was ready to bolt on when I got it...
Separate names with a comma.