Hey Cammer- I only have a 2 1/2" Rancho lift on my '66 but I would imagine you might get a bit of bump steer with 4" and the stock pitman arm-you...
I checked out Smittybuilt looking for a roll bar and front cage(or what ever the politically correct crowd call them) and it seems they are not...
That's what I figured and I totally understand-thanks!
Just for consideration but even if they do get soaked with mud/water, wouldn't they sling it off as they spun at highway(or whatever) speed after...
Charlie- I have a full hard top off a '47(someone painted "spirit of '47" on it) '2A but it's not aluminum. It didn't fit my '52 as unknown to me...
Some of you have looked at my '52 Willys at http://spaces.msn.com/yoopercj/ and I was wondering if anyone noticed the serial number? It is stamped...
My '71 and '65 both have the heater control cable at hole "e". My '65 has another hole, just below and to the passenger side of the main harness...
Sorry Gwillys for the delay, It seems that my CJ3A has two springs that hook on to a rusted part of the hat channel and I'm sure that is not...
If I remember right on my early '5s and CJ2A there is a metal rod with a hook at both ends to extend the spring to the attaching point. I think it...
I personally haven't had to mess with these(YET!) but can you get a pair of vice grips in there on the nut and cage(bracket) to hold it?
How about inner tube rubber if your looking for something inexpensive. Roll or fold it and pop rivit on the sides of the risers. Just a thought...
Years ago for a quick fix on my '66 I cut out a section of old truck bed for the back floor. It had a few dents and scratches to match the natural...
On my '65 Fhead the small line goes to the heater control, the 1/4" line goes to the vacuum pump, the large hose goes to the valve cover cap.
Thanks for the replys. I didn't know about the difference in height between the F and L heads. I do have some thinking to do about what to...
Hey guys-I've been a reader for a little while but first time poster. Just a little history-I had a '76 CJ5 in college(in the '80s) for weekend...
Separate names with a comma.