I saw this on a for sale item on craigslist and thought to post it up for guys doing body or tub work. Looks like a good concept as long as you...
My CJ6 has a growl in 1st and 2nd gear that goes away in 3rd. Billy and I changed out the oil/water mix that was in it and replaced with Mobile 1...
Well here are the pictures of the lift, wheels/tires, and ground clearance! Still working on timing and getting it to run smooth but I had a...
I have always been a fan of AC Delco for GM products and Motorcraft for Fords but what does and AMC 304 prefer? New territory for me so keep in...
Ok I am installing my 2 1/2 in lift with 1/2 in lift shackles. The front drive shaft even at a slight droop hits the 304 V8 exhaust crossover pipe...
So I don't hi-jack the other thread I wanted to post my wheels for the CJ6. I sandblasted the wheels except for the original inner part where the...
I spoke this evening with the guy that originally had my 74 CJ6 after govt service. :) His grandfather bought the 6 from the US Forest Service in...
Well these are the original decals on the dash of my Forest Service CJ6. I was wondering if I could purchase any replacement ones or if anyone...
Anyone got a flatty picture of the front tub to frame mount that is in front of the gas tank. I have all the new floors in and I can not get the...
Some of you met my friend Scott and his Zuki at Tellico. He has made many upgrades since you last saw it and one of them recently was OBA, On...
My friend Scott that had the blue Zuki a couple of years back at Tellico is considering putting this a stock rebuilt 1.3 65hp Suzuki motor....
Get your mind out of the gutter. R) Was just wondering what the total length of a CJ5, CJ6, and a flatty with the M416/M100 trailer is from front...
So I am trying to decide what to do with my swiss cheese/beat up firewall. As you can see my 3b has been the brunt of many if not curious...
Anybody know what year and make D44 front knuckles I need to do the conversion. Looks like the regular steering will hit the wrangler SPOA on the...
Ok I am assembling the front end. I installed new upper and lower ball joints. Now with axle shaft in and the spindle bolted in place the #&$&#...
Forgot to post this. I spotted this in Lone Pine CA when we were out visiting in March.
I am rebuilding my D30 front end. I have it totally apart and strriped. I have soaked the upper ball joints down with penetrant and tried using a...
I have been planning on using a 1990 4.3 TBI engine for the 3b but now I am thinking about going to a 00-02 Vortec becase I can buy one out of a...
Separate names with a comma.