I had the same problem and finally traced it to the fact that my underseat tank was for a four banger. I knew that when I installed it but...
Thanks for the advice. I am not considering the twin stick at this time, but I'll keep it in mind. My current program is to enhance the stock...
I did the Cape Conversions HEI last year. I recommend it. Installation was simple and performance greatly enhanced. I have to emphasize...
I need a longer shift lever for my D18 transfer case! If I could just install a lever similar to the transmission shifter, I would be a happy...
I've got the original radiator for the dauntless with the 180 thermostat and stock fan. However, I added an 1,800 cfm flexalite electric fan....
Thanks for the reference! That is just what I needed. Judging from their prices this won't hurt very much. JK PS to Rio: Good luck in...
While watching one of the gearhead shows on cable a week or two ago, I saw the slickest Ebrake kit for replacing the d18 drum brake. Trouble is,...
All is well with the new flaming river column and shaft and overall power steering upgrade. Except when I cut the Spartan unit out and started...
Update. I put a 4" length of 3/8" fuel/emissions hose on the vent. I will lower the float about 1/16" and give her a try. Thanks for the...
Any detectable negative effects from the spacers? My CJ rubs also, but I don't want to screw up the vintage looks! JK
Mine leaks no more. Just had it and the T86A rebuilt. wish the t86 was nice enough not to mark its territory. JK
Thanks Tim. That is a lot of information. I'm not familiar with the vents on the 2v, and the jet extensions are Greek to me. But, knowing...
Thanks Nickmil. I had an incident over the weekend where my 2bbl Holley flooded on steep hills and I am considering possible cures. I saw an ad...
I did a quick search of the past posts and the tech section, but I'm not totally convinced of the answer. So here it goes.... I have a '78 231...
My '67 has 3.73's and does fine until you go up a steep grade on highways in the mountains. My '05 Wrangler with the 4.0 L I-6 and 3.73's does...
I've done the same as southtowns. I filled all the empty holes with bolts, nuts and various washers. If you think about it, these old babies do...
I can't wait to see Lynn's pics, as I have some crack formation at the rear of the rear spring perches too. By the way, both of my Jeeps live in...
I've seen them listed in the classifieds around here anywhere from $2,500 to $4,500. There is a '78 Renegade listed for $4,500 currently. In my...
Many moons ago, about 1974 or so, my '71 J-2000 pickup began to show signs of sagging springs in the front, and I kinda wanted a lift, but knew...
Hey Mr. Greencj5. I strongly recommend the Cape (CRT). It is about as idiot-proof as they come, and did it ever improve my :v6: performance!...
Separate names with a comma.