The diesel clatter and deep flowmaster exhaust sound overwhelms a friend's phone in a metal 2 stall garage [MEDIA]
Thanks all for the advice and replies. When you say "finned" I hope you don't mean the stock 11x2 manual drums I have. They have small "ribs" or...
SoCAL huh? I grew up in East SF Bay Area.
That is a very sweet CJ5, '68BuickV6! I love the looks on everyone's faces. Some hater-ation(probably indignant SUV or truck owner who thought...
The C223 and C223T are the larger pushrod motors in trucks, even the S10 diesel. Most Themo King reefers have the lil C201 in them. That's where I...
I admit the 22 looks right, but unless a few people who have used their wheels here chime in waxing euphoric about their experiences, I wouldn't...
[IMG]
ACTUALLY, I seem to be having the same issue. HOWEVER, it's not nearly as bad, and I *think* the axle bearings are actually the problem! The...
Hello all, I am looking into the future when my 31's on wagon wheels are worn out. I don't want to buy any more 15" tires. They are getting harder...
:) It's an Isuzu 4FB1 sourced from a Chevette. Before anyone gets excited and tries this swap, these are pretty rare, and the bellhousing...
Need to take new pics. Some of these are almost a year old, and I have refined quite a few things. [IMG] [IMG] [IMG] [IMG] [IMG]
I R/R both rear slaves, and brake system working exactly as should! And I bet the ones I took off only need a cleaning and gentle hone with...
This is an excellent suggestion! So bizarre I wouldn't think of it, but possible! Diesel warming to go to parts store. I will check line temp...
Forgot to mention, @ 1" pedal travel before brakes lock, while jacked up. Both drums slid right off. Again, if anything too loose....
All great input, and appreciated, all. But often an extra set of eyes ears and brains(or better yet, several) can illicit the answer. So again...
The Proportioning valve is a stock one, the nicer of the two I had from my CJ and the parts '74. The master cyl. is from O'rielly I believe....
Hello folks, I have an interesting problem I have never experienced that has me stumped. Hoping someone may have experienced this and knows a...
Hey Gents, So, one of the valves appeared not as bad off as I originally thought. So imma roll the dice. Both of the valves I have are this...
Oh I forgot to mention: I accidentally bought the EARLIER style MC. The one with the cap that is bolted on, not the bail wire type. I thought I...
So I have been poking around and have a few questions: Again, could I plumb the lines straight from the MC to front/rear? The correct port...
Separate names with a comma.