I'm pretty sure the motor mounts are original as it shakes a little bit. Would taking off the radiator shroud and using a floor jack with a 2"x12"...
I have 31 x 10.5 x R15 tires. The spare is a 15" rim but more like 28 or 29" tall. The spare has to be replaced because of cracked sidewall....
1960 CJ5, no tire changing equipment came with the Jeep. Tires are 31" x 10.5 x R15. Would a bottle jack be fine to use on hard ground or...
I forgot to ask the previous owner which grade gas he used. I've been putting in mid grade? Suggestions please. 1960 CJ5 Fhead stock.
Was driving this morning with the overdrive in low, down shift the floor three speed from third to second to make a left turn than shifted to...
We did the tune-up about a week ago, now I notice I have light blue smoke out the exhaust after five mintues of warm up. Also has a sputtering or...
I don't have a service book yet so I would like to confirm these numbers please. 1960 CJ-5 FHead 4 cyl.-134 Spark plugs J8-.30 gap Point Gap...
The steering column button appears to be making contact. The horn is mounted on the fender well sitting on a bracket and I think its original with...
I have a 1960 CJ5 that came with no belts. Was the 1960 CJ5 delivered with belts? I'm not sure about the law here in AZ, but I'll be looking for...
The Jeep will be outside so something that would last a couple years would be fine, until I off my motorcycle collection. My CJ-5 is a 1960....
New boots should be here next couple of days. Are the boot fastensers held down with screws or nut and bolt? Thank you
Gloss rustoleum black or semi. What would you guys use? Looking for quick and easy on the floor. Thank you!
[IMG]I decided to take a different road at this stage in my life and bought my first Jeep. It's a 1960 CJ5 4 cyl F-Head Hurricane 134 cid. It has...
Separate names with a comma.