1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 44

Discussion in 'Early CJ5 and CJ6 Tech' started by 1fastsedan, Sep 1, 2009.

  1. 1fastsedan

    1fastsedan Member

    Last edited: Sep 1, 2009
    1fastsedan, Sep 1, 2009
    #1
  2. lgreve

    lgreve Renegade all the Way

    i have put a D30 out or a '78 CJ7 you have to weld on new perches but you can pick them up for relatively cheap. an axle out of a newer jeep ('87 and newer) will not work because they swapped the front axle pumpkin from the passenger side to the driver side and that will not work in your old cj unless you completely swap out everything.
     
    lgreve, Sep 1, 2009
    #2
  3. alex211

    alex211 Member

    Wouldn't that mix narrow and wide track axle widths though?
     
    alex211, Sep 1, 2009
    #3
  4. Warloch

    Warloch Did you say Flattie??? Staff Member

    You want a Narrow Track D30 from '72 to '81... Info Link HERE
     
    Warloch, Sep 1, 2009
    #4
  5. sparky

    sparky Sandgroper Staff Member Founder

    sparky, Sep 1, 2009
    #5