1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Another New Idea (to Me) - Temporary Plug For Hard Fluid Lines

Discussion in 'The Tool Shed' started by 49T&C, Feb 6, 2022.

  1. 49T&C

    49T&C Member

    Before, if I had to disconnect a hydraulic line,fuel, transmission or brake line, etc. I'd always stick a golf tee or something in it and wonder if it was going to still leak. If it was for longer term storage I'd put some tape over the tee and hope for the best. Now, I came across the best idea - those little, tapered disposable orange ear plugs that you roll in your fingers before inserting in your ears... These work wonderfully for keeping the fluids inside the lines as they swell to fit the lines and do not leak. Disposable and cheap. You probably already have some in your shop. Just a thought.

    Cheers,
    Chuck
     
    Ol Fogie, Lockman, ITLKSEZ and 3 others like this.
  2. Glenn

    Glenn Kinda grumpy old man Staff Member

    Cool idea, especially for short term use. (y)
     
  3. Jw60

    Jw60 That guy 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Test first with the liquid. I'ld hate to find out what melts them.
     
    Lockman, dozerjim and ITLKSEZ like this.
  4. duffer

    duffer Rodent Power

    I'd probably end up putting the diesel flavored ones in my ears. I just bought a bunch of JIC steel plugs years ago and use them for the hydraulic/AN stuff. I also have a good collection of invert flare plugs. As Joe suggested, we need a compatibility test.
     
  5. Keys5a

    Keys5a Sponsor

    I have a drawer with a couple dozen raw wood golf tees. These tend to swell slightly with most fluids, so are a long-term plug for me. Today, they are painted or plastic and don’t seal very well.
    -Donny