1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hi-Lift Jack Mounting

Discussion in 'Early CJ5 and CJ6 Tech' started by Parkhurst, Oct 31, 2013.

Page 2 of 2
  1. grannyscj

    grannyscj Headed to the Yukon

    If you want to mount it to the roll bar, use muffler clamps as suggested.
    [​IMG]
    It makes a nice out of the way mount.
    [​IMG]
     
    grannyscj, Nov 5, 2013
    #21
  2. supertrooper

    supertrooper Member

    I made a mount out of some scrap angle and a few bolts. It puts the jack just above the tailgate. I also added a cb antenna mounting tab.
     
    supertrooper, Nov 5, 2013
    #22
  3. DanStew

    DanStew Preowned Merkin salesman Staff Member

    Here is mine.

    [​IMG]
     
    DanStew, Nov 5, 2013
    #23
  4. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor


    Dang, you folks must run in some pretty wide open country, to carry that kind of height. Wouldn't last a day here in NH.

    I won't even use a roll bar, so as I can sneak under fallen trees, low branches, bar-gates, etc.
     
    Last edited: Nov 6, 2013
    PeteL, Nov 6, 2013
    #24
  5. 68BuickV6

    68BuickV6 Well-Known Member


    The lowest tree I've ever encountered in forested stuff (Big Bear for example) just brushed my roll bar and windshield. You couldn't pay me to run without a roll bar or cage, to much can happen even on a fire road.

    Now narrow trails are another story... :twisted:
     
    68BuickV6, Nov 6, 2013
    #25
Page 2 of 2