I have a 63 CJ5 and was curious if later CJ5 or CJ7 tops and roll bars would work on mine. Mine currently has an original safari type of set up...
I had a post on here from a month or so ago about this axle but in that one I misidentified it as a 72. I confirmed with Dana Aftermarket that...
I have a 1972 CJ5 that currently has 32 by 12.5 tires. I would like to go back to something smaller to where I can restore the side-mounted spare....
[ATTACH] Hey yall! I will post a somewhat chronological overview of my project here. I will have a thread specific to fabricating the body as...
Hello, I'll get right to it. I know nothing other than basic mechanics and fab. Most of my jeeping experience is from making my first cj5 rust...
Hi, when I disassembled my CJ5 steering, the Ross box was a complete mess. I am almost ready to put it back together but I need to purchase the...
I'm wondering what is the front axle width of a truck dana 25 and or 27. There is a guy near Marietta Georgia with a set he says is a dana 53 rear...
Hello all, I’m aware that my 63 is on a 3B frame and did not come with a V6. So I’m trying to see if this is the best I can do set up it keeps it...
In the process of bringing this piece of beast back to life. I'm so close to driving this awesome machine around! My current issue is high oil...
i have a 74 cj 5 with an amc 304 and, somehow, a t14 transmission that I’m hearing is too weak for the 304. My understanding is that a t15 should...
I have a 1966 CJ5 that has Summers Brothers aftermarket 1 piece flanged axles in the dana 44 rear and dana 27 front with t-10 4 speed, warn...
72 CJ5 gas tank
I have recently acquired a 1963 CJ5 with a 1969 Dauntless 225 ci V6. It has a Dana 44 rear end with a solid, 1-piece axle, full floating. On my...
Hi, does anyone have drawing/plans/schematic to build a roll bar? It is to fit a 62 CJ5. Thanks!
The PO of my ‘71 cj5 put custom pipes on, but they are straight from the manifold out the side with no muffler. Does anyone have any suggestions...
I just finished dealing with a carburetor flooding issue which was detailed in an earlier thread here. Now it runs very well but there is a...
Can anyone suggest a good set of hanging pedals for a 62 CJ5? Not from a "newer" jeep, we do not have them down here in South Florida. I am...
Hi, I am about to start the front floor replacement. I originally got the jeep with barely any of the original floor to go by. I want to make the...
I have no spare and I need help identifying my rims to see where can I get another. Thanks![ATTACH]
I have a 62 cj5 with a Dana 25 in the front. I noticed the yoke has a considerable play in-out. I opened the pumpkin and parts look somewhat ok....
Separate names with a comma.
