1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

brake light switch

Discussion in 'Early CJ5 and CJ6 Tech' started by sieg, May 25, 2011.

  1. sieg

    sieg Sponsor

    i have a 69 cj5 with 2 pressure switches for the brake lights one in the engine compartment the other is midway on the frame under the drivers seat do i need both hooked up for the brake lights to work. the lights work if I cross the wires. also is there an after market switch than that I can run off the brake pedal?
    thanks
     
    sieg, May 25, 2011
    #1
  2. 1960willyscj5

    1960willyscj5 Well-Known Member

    You could maybe adapt the one from a motorcycle to work. That is basically what they are. A spring-loaded normally off switch that is turned on by the pedal pulling on a really stiff piece of wire that pulls the switch into the on position.
     
    1960willyscj5, May 25, 2011
    #2