1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Project...Kahuna 66 cj6

Discussion in 'Builds and Fabricators Forum' started by bkd, May 11, 2007.

Page 38 of 42
  1. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    havn't touched it and have another project rolling in tomorrow :rofl:
    think I'll have 5-6 hours tomorrow though :)
    git er done Joel R)
     
    bkd, Sep 10, 2010
    #741
  2. Dummy

    Dummy I kick hippies

    Well, if ya got to have problems this is the kind to have! :beer:
     
    Dummy, Sep 10, 2010
    #742
  3. cj6/442

    cj6/442 Sponsor

    wow , nothing to swamped good for you jim.
    I can go up there to pour, and put the 6 back together.
     
    cj6/442, Sep 10, 2010
    #743
  4. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    Hey Joel! :D[​IMG]
    Jim
     
    bkd, Sep 12, 2010
    #744
  5. jzeber

    jzeber Well-Known Member 2022 Sponsor

    Looking good Jim, you getting ready to bench press that bad boy back in?
     
    jzeber, Sep 12, 2010
    #745
  6. HeavyIron

    HeavyIron Member 2024 Sponsor

    That's what Taylor's are for! R)
     
    HeavyIron, Sep 12, 2010
    #746
  7. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    after church we'll ( Taylor and I) put it on the tranny jack and get it installed......least wise that's the plan :)
     
    bkd, Sep 12, 2010
    #747
  8. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    tried to install the trans/tc Sunday afternoon by myself (Taylor was otherwise engaged) and after several attempts the assembly came off the jack and crushed my left hand :rofl:.......after icing the hand for several hours and some pain meds I determined it wasn't broken :)..........little swollen but I got lucky
    Tonight I got Taylor to come help and we strapped the assembly onto the jack and after some well chosen words and a little sweat it finally lined up and went together................just need to get linkages hooked up, cross member in, and interior back together :beer:
    [​IMG]
    [​IMG]
    should have it finished and ready to road test by tomorrow late afternoon
    Jim
     
    bkd, Sep 13, 2010
    #748
  9. Patrick

    Patrick Super Moderator Staff Member

    :toetap:
     
    Patrick, Sep 13, 2010
    #749
  10. cj6/442

    cj6/442 Sponsor

    OUCH! I quess ,,,,,,,,,better your hand than the head with teeth right?
     
    cj6/442, Sep 13, 2010
    #750
  11. Vanguard

    Vanguard Take Off! Staff Member

    Ouch. Sorry to hear about your hand. Pics later. But Betsy went down the road on Saturday after a minor linkage tweak. Glad she's back together.
     
    Vanguard, Sep 13, 2010
    #751
  12. EricM

    EricM Active Member

    x2

    A picture is worth a thousand words...


    [​IMG]
     
    EricM, Sep 13, 2010
    #752
  13. cj6/442

    cj6/442 Sponsor

    Eric..................................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
     
    cj6/442, Sep 14, 2010
    #753
  14. Dummy

    Dummy I kick hippies

    Did his handle just change from "Cougar Bait" to "Tinkle Bell"? R)
     
    Dummy, Sep 14, 2010
    #754
  15. jpflat2a

    jpflat2a what's that noise?

    oohh
    I like it !
     
    jpflat2a, Sep 14, 2010
    #755
  16. Vanguard

    Vanguard Take Off! Staff Member

    That bell is clearly for an F-134. A V6 needs more cowbell. :D
     
    Vanguard, Sep 14, 2010
    #756
  17. cj6/442

    cj6/442 Sponsor

    lets get this straight , Eric hung that little cutesy bell on my junk when I was not looking ,,,,,and I shot him a glance so tough that he ran over to it and removed it without making eye contact.....
     
    cj6/442, Sep 14, 2010
    #757
  18. EricM

    EricM Active Member

    agreed. And at no time did I disturb any Hello Kitty merchandise that may or may not have been on said junk.
     
    EricM, Sep 14, 2010
    #758
  19. cj6/442

    cj6/442 Sponsor

    I've got the Power........................Rangers
     
    cj6/442, Sep 14, 2010
    #759
  20. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    hope ya'll are having fun :rofl:.....tinker, I love it
    got everything bolted up, need some gear oil and inspect why I have no clutch pedal....getting close
    Jim
     
    bkd, Sep 14, 2010
    #760
Page 38 of 42