1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Permatex Question

Discussion in 'Early CJ5 and CJ6 Tech' started by russo, Mar 23, 2007.

  1. russo

    russo Hope is not a method

    This is a simple question, and I thought the answer would have on the product directions. I used some Permatex Ultra Black this morning on the bottom access plate on my xfer case. The directions say it fully cures in 24 hours. Do I need to wait that long before I put oil in and use the jeep, or can it be placed in service sooner?
     
    russo, Mar 23, 2007
    #1
  2. crewchief22

    crewchief22 New Member

    If you used only a thick bead of the Ultra Black without a gasket I would recommend letting it set per the instructions. If you just coated a gasket with sealant I would give it a couple hours only.
     
    crewchief22, Mar 23, 2007
    #2
  3. russo

    russo Hope is not a method

    Thanks Much.
     
    russo, Mar 23, 2007
    #3