1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1969 Commando Dash Help!!!

Discussion in 'Jeepster Commando and Commando Tech' started by badcj5222, Mar 15, 2021.

  1. badcj5222

    badcj5222 New Member

    Anyone out there got some helpful directions to removing the dash and dash pad (pictures would work real well lol) , im a newbie to the commandos , ive got cj5's and a scrambler both ive redid but this is a new world , Thanks any and all help is appericated !
     
    badcj5222, Mar 15, 2021
    #1
  2. jackdog

    jackdog Member

    The dash is welded in and requires cutting to get it out. The dash pad has screws near the defroster vents which are usually rusty and a pain to get out, they also have studs with nuts on the ends of the pad that you acess behind the dash. These break off easily so be careful. Good luck.
     
    jackdog, Mar 16, 2021
    #2
  3. badcj5222

    badcj5222 New Member

    A million thanks now i know where i stand on re-wiring guess im crawling under the dash.............
     
    badcj5222, Mar 16, 2021
    #3
  4. colojeepguy

    colojeepguy Colorado Springs

    Good to know, I'll be in the same boat sooner or later.
     
    colojeepguy, Mar 16, 2021
    #4
    Tom_Hartz likes this.
  5. Tom_Hartz

    Tom_Hartz Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Same here.
     
    Tom_Hartz, Mar 22, 2021
    #5