1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1969 Commando Dash Help!!!

Discussion in 'Jeepster Commando and Commando Tech' started by badcj5222, Mar 15, 2021.

  1. Mar 15, 2021
    badcj5222

    badcj5222 New Member

    tennessee
    Joined:
    Mar 15, 2021
    Messages:
    2
    Anyone out there got some helpful directions to removing the dash and dash pad (pictures would work real well lol) , im a newbie to the commandos , ive got cj5's and a scrambler both ive redid but this is a new world , Thanks any and all help is appericated !
     
  2. Mar 16, 2021
    jackdog

    jackdog Member

    Finger Lakes NY
    Joined:
    Jul 16, 2013
    Messages:
    526
    The dash is welded in and requires cutting to get it out. The dash pad has screws near the defroster vents which are usually rusty and a pain to get out, they also have studs with nuts on the ends of the pad that you acess behind the dash. These break off easily so be careful. Good luck.
     
  3. Mar 16, 2021
    badcj5222

    badcj5222 New Member

    tennessee
    Joined:
    Mar 15, 2021
    Messages:
    2
    A million thanks now i know where i stand on re-wiring guess im crawling under the dash.............
     
  4. Mar 16, 2021
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,110
    Good to know, I'll be in the same boat sooner or later.
     
    Tom_Hartz likes this.
  5. Mar 22, 2021
    Tom_Hartz

    Tom_Hartz Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    North Carolina
    Joined:
    Apr 9, 2014
    Messages:
    478
    Same here.
     
New Posts