1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Yet another T18 post...

Discussion in 'Early CJ5 and CJ6 Tech' started by 69Willys, Oct 4, 2013.

  1. 69Willys

    69Willys Las Vegas, NV

    ...there is one available locally, a T18-1B, mated to D20. I think it said it's from a 1970 Kaiser J-3000. Will it bolt up to my 225?
     
    69Willys, Oct 4, 2013
    #1
  2. RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    Input shaft is way to long for a 5 but I have seen one transplanted in a 6.
     
    RATTYFLATTY, Oct 4, 2013
    #2
  3. nickmil

    nickmil In mothballs.

    What engine was it behind? If an I-6 it might be able to be made to work as they had a fairly short input shaft. If a V-8 then it would need converted at the input shaft would be around 12-13" or so long. Plus would be setup for a 20 or large hole 18 transfer case.


    Sent from my iPhone
     
    nickmil, Oct 4, 2013
    #3
  4. 69Willys

    69Willys Las Vegas, NV

    OK, thanks. I have a D20 in my Jeep. The running gear is from a 72 Commando, or so I was told when I bought it. I thought there was a chance the T18 might have bolted up.I can't afford to do the necessary mods right now...
     
    69Willys, Oct 5, 2013
    #4