[IMG] 3" Exhaust tubing to use as cup holders. [IMG] Tight fit between the fuel tank and tool box but works. Cup holders work great for...
Making progress on buttoning up the v8 swap. [IMG] "adjusting" the front frame.... It wouldn't steer hard left, but would go hard right, or vice...
Both good weigh ins, I know my buddy runs a 30 with a detroit and 36s with a 4.0L and Atlas in his YJ and rarely breaks anything in it. I had...
Keep it on topic or don't say anything at all, thanks. I'm aware the EB is on the wrong side, but it's fixable. My issue with a 44 is what 5...
I've searched, I've researched, I've checked, I've asked... Same Jeep...SBC/32's (for now, 34's later) Am I better off building a 44 front end?...
It really doesn't weigh much as tough as it looks... Heaviest part is the winch, which is much lighter than an 8274. That was my first project...
Holbrooks installed. Need to make some shock mounts. Buddy of mine has some stock JK shocks I'm going to nab and see if I can get them to extend...
Most bugs worked out save for the SM420 grinding while shifting (rebuild here I come) Fan clears, doesn't over heat even with no shroud which...
It's not a slight abrasion issue I'm running into, it's full contact with the lower radiator hose and fan, when the right front is flexed out and...
It had snowed a week or so ago, and i couldn't help but play in the dirt and mud. I guess I'm sick and twisted, dirt and mud is fun in a Jeep....
Few gremlins are poking their heads, otherwise it's too much fun it should be illegal. Chirps the tires shifting through the gears, pulls...
Looking good man. Wishing sometimes I'd put a late model V8 in mine
They're dime a dozen at the U pull it, rebuild kits for them are ~$25, plumbing was a non issue as I had to use a custom hose anyway... I have $35...
[IMG] [IMG] ..
Separate names with a comma.