Which "U-bolts" ? U-bolts for the drive shaft universal joints, or U-bolts for the axles ?
I would replaced that draft tube with a PCV system, because I sometimes ford streams with my Jeeps which I often use for getting to places I like...
I prefer a breaker point distributor mainly because if it fails, even out in the middle of nowhere, I know how to fix it. If I had an electronic...
Pretty simple concept, I think.
Yes, I have been working on old Jeeps for about fifty years and know that the switch is a pressure switch and there is no adjustment for that. The...
If "she is driving nice" you probably have the steering in good enough shape, but if you can see much wobble in the steering sector as you rock...
Could be you are smelling the discharge from the draft tube.
Are you talking about towing the Jeep on a trailer behind the T3C ? Or are you talking about flat towing the Jeep with a trailer attached to it?...
I also use the "Traveler" brand GL-1 oil from Tractor Supply Co as mentioned earlier in this thread. I use it in my Jeeps, and it is what I used...
What Donny says makes a lot of sense. Usually when I have a switch fail it means the brake lights do not come on. If the brake pedal push rod is...
Look for a NOS, good brand switch. They do show up on Ebay from time to time.
Glad you got it sorted out.
They are available from just about any Jeep parts supplier. The last ones I bought were from QTM, but I have also bought them from Classic...
On a marine engine corrosion is a larger factor than on an engine in a car, due to electrolysis softer metals like aluminum, combined with an iron...
Separate names with a comma.