I run Pertronix, I have really liked it. Runs smooth as an oddfire can.
[IMG] [IMG] YouTube Still figuring out the 4 speed, gear selection is everything in the snow with skinny tires and 3.73 gears. Unfortunately my...
Honestly, I found the problem, I must have bumped the timing working on it. It was too advanced. I put the light on it and retarded it and that...
[IMG] [IMG] [IMG] [IMG] Sent from my HTC6435LVW using Tapatalk
No points, I converted to the Pertronix, how do I check the vacuum advance?
225 V6 and the Rochester 2G carb. I have power down low, and it seems to accelerate well and idle well. I was plowing snow fine. Once I reach...
Insulating the top a bit for the snow run this weekend. It's going to be a cold one. [IMG] [IMG] [IMG] [IMG]
I forgot to leave the video in here.... Plowing with the flatfender Willys Jeep. - YouTube Windshield in [IMG] Doors on, and aligned [IMG]...
The mount listed above worked beautifully. We did my engine mounts to while I was at it Sent from my HTC6435LVW using Tapatalk
Finally bought the above cap, going to try it, but it still has the points window like the one I have and looks the same upon initial inspection....
I am having the same issue as the OP, and I am trying to determine if my distributor is the same as his before I just throw parts at it, I do not...
Best I could do right now as I didn't have time to pull the dizzy and I have to drive it in the am to town. I couldn't see any markings. Can you...
Ok now how do I figure it out, I have the RR 184 on my jeep, right bank running rich, same as you had. But I do not know if it's a Delco...
Thanks, I still have the box for mine I think, I will look when I get home. I need to make a trip to Napa anyway .
Separate names with a comma.