how about welding a bolt to the stub and use a socket on it? A couple tacks should do it. Weld won't stick to cast iron. Also might weld a washer...
Is the exterior of the engine clean and free of oil leaks? I found oil in radiator water on a customers car and a thermostat housing gasket...
If you have not started, arc weld will not stick to cast Iron as mentioned above. Common method on exhaust manifold bolts that break is to weld a...
I found and picked up a nos w gauge for the Renegade II, seems it's 6v and maybe feeding it 12v was a killer.
Do pick up a new power valve and install. I've seen many rebuilds end up running with the same richness issue due to that part. Additionally make...
Garnet is a hard glass-like material and works well for steel. The thing is when new it has sharp edges that round off after each re-use. New its...
American Stripping in Sac has done car bodies for people I know. They have different media for different applications. Sand is rather rough in...
Rusty's has been around quite awhile and stands behind his products. I imagine he offers different spring packs now. Before selecting springs it's...
I had similar with a clutch plate that had a broken spring
any chance the Jeep had government roots? They had their own color. This is representative, you'd have to find a '70 chart....
Maybe talk with a boat vinyl shop. I bet you could build the top, source a used set of doors and latch jamb and have the shop build the vinyl to...
Very nice bit of work. I'd like to have the excel file in order to incorporate our cj info.
Separate names with a comma.