He may be "that guy" but this is a really nice example of an early CJ6. He wouldn't have it if it wasn't! BUMP!
It was working just fine and would still be in there however I found a JEEP T-18 from a CJ5 with the 6:33 first. I can't answer your second question.
Ethan, I'm in Syracuse NY and have a t-86 I will give you if you can find it a ride. It was behind a 225 and has been replaced by a t-18. It was...
Spartans front and rear in the MB-5. Night and day difference and yes my rear does clank in sharp turns.
If the spacer is going between the spring pack and axel you will lower the ride height of the jeep. You may also create some minor handling issues.
I find this interesting. I've seen a few ventilating tall 3A/M38 windshields on build photos. I'm guessing they are custom. I'd pay big $$ for one...
That is not an RR Z-Link. I have one in the MB5. Once we got the caster corrected no issues at all. 70 MPH, on hand on the wheel.
Rear springs to the front did not require extending the frame. Shackle mounts moved to the front of the frame, spring hangers slightly trimmed and...
Unless you are going to upgrade to Old Man Emu do not go YJ. Stock YJ springs sucked on YJs that's why we all dumped them. My MB5 is SOA. It runs...
Back when I was building YJs there were multiple ways to go with leaf springs and only one best way which still holds true. Old Man Emu HD...
7 1/4 Stick-out would be from a CJ. Count the revolutions in first or gear teeth to be sure what you have. You may get lucky with a 6:32...I did!
Interesting, we just finished tearing into an old Warn FF 44 setup and guess what... It's was open, with 4.27 gears, Premium Hubs and 19 spline.
On a fatty I would suggest using oe width rear springs (from the manufacturer of your choice) on all 4 corners. On the front it involves moving...
Ran them on a YJ with OME Springs. Combined with the softness of the springs we did have some highway handling issues, nothing crazy but...
Out of curiosity, were there axle options on the Warn FF Kits or were they all 30 spine?
Separate names with a comma.
