1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ol Fogie's Recent Activity

  1. Ol Fogie replied to the thread Caster.

    Now that you mention it I am Sure I ran bias ply tires back then too. My 74 cj5 came with bias ply tires too. I measured the caster on...

    Apr 26, 2024 at 10:05 AM

  2. Ol Fogie liked jeepdaddy2000's post in the thread Caster.

    Early manual boxes had high steering ratio's which helped keep effort down. And radials run much lower pressures and softer compounds,...

    Apr 26, 2024 at 10:02 AM

  3. Ol Fogie liked ITLKSEZ's post in the thread Caster.

    Probably very little, like in the 0-3° range. They built manual steering rigs back then to steer easily, and the closer to 0° the...

    Apr 26, 2024 at 9:49 AM

  4. Ol Fogie liked sterlclan's post in the thread 1972 Cj5 Wiper Linkage Binding.

    if they are parking on the wrong side the short pivot on the motor is 180 off

    Apr 26, 2024 at 9:48 AM

  5. Ol Fogie liked jeepljeff's post in the thread M-series 24v And 6v Parts?.

    I'm trying to get a better idea of what these parts are. The reality is, I'm not restoring this Jeep and will probably sell them. Is...

    Apr 26, 2024 at 9:40 AM

  6. Ol Fogie liked jeepdaddy2000's post in the thread Belts.

    The exact location for lap belts isn't too important as long as they are mounted so the belt goes around, not across the lap. Insure you...

    Apr 26, 2024 at 9:28 AM

  7. Ol Fogie replied to the thread Caster.

    X2, The best driving truck I ever owned was a 1964 Ford F-100 with a front straight axle, leaf springs and manual steering. Man that...

    Apr 26, 2024 at 9:27 AM

  8. Ol Fogie liked jeepdaddy2000's post in the thread Caster.

    Nice part is, you get to see it on the cart instead of clinging to the steering wheel of the Jeep at 50MPH trying to slow down before...

    Apr 26, 2024 at 9:07 AM

  9. Ol Fogie liked jeepdaddy2000's post in the thread 1974 Cj5 Hei Wiring.

    Ignition cycle or START (cranking) cycle? If it is the cranking cycle, you can run a bypass from the I terminal of the solenoid to the...

    Apr 26, 2024 at 9:06 AM

  10. Ol Fogie liked M1redskin's post in the thread 1974 Cj5 Hei Wiring.

    I did find a key switch that does not lose power in the on position during ignition cycle so I think I have the problem solved. Thanks...

    Apr 26, 2024 at 9:03 AM

  11. Ol Fogie liked M1redskin's post in the thread 1974 Cj5 Hei Wiring.

    Thanks guys. There is real popular hot rod wiring on YouTube video I think called rescue wiring that lays out a complete schematic but...

    Apr 26, 2024 at 9:03 AM

  12. Ol Fogie liked Buildflycrash's post in the thread 1974 Cj5 Hei Wiring.

    There is one post on ignition switch that does not loose power when cranking. The “Accessory” post does lose power when cranking.

    Apr 26, 2024 at 9:02 AM
Show older items
New Posts