31x10.5 Micky Thompson's on my 75 and they like 28 PSI. More than that it wanders.
Try this. https://www.bestop.com/products/snap-repair-kit-jeep-1955-1983-cj5-1976-1986-cj7-1987-1995-wrangler-yj/?vid=2189&sku=9300350
Excellent work!!
Thanks, I'm looking now. I also grabbed some press on washers for the control cable ends.
Hey all, I am replacing the heater core and while I have the housing torn down I had some questions. 1) Is it foam padding or dust and crud on...
Ha! That's true!
I wish the transmission access opened up that big in my 75.
I am going to check that tomorrow. I was reading the manual and it mentioned that.
It's a 2.5" lift. I will get another alignment and see what the printout shows.
Excellent question. Yes, when I let off the gas it as far as I can remember it goes right. Could the drop pitman arm be causing that? Update:...
All new springs, U bolts and bushings too.
I replaced tie rod ends, drag link, steering box, steering shaft ( went with Borgeson type), new bearings and bushing in steering column, went...
3.73. Good for highway
I don't put the top on anymore. It does get chilly in January and February.
Separate names with a comma.