1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Stakebed's Recent Activity

  1. Stakebed liked tg300dlx's post in the thread T18 Trans Question.

    thanks for the replies. i think i got it figured out. A the new input shafts ive found are modeled after the later t18's that use the 23...

    Jul 26, 2024 at 2:23 PM

  2. Stakebed liked jeepljeff's post in the thread 1952 M38a1 Build: Not For The Purists.

    I thought these gauges were waterproof but they aren't. While the bezel is sealed the backside isn't. The internals on this one were...

    Jul 26, 2024 at 12:45 PM

  3. Stakebed liked jeepljeff's post in the thread 1952 M38a1 Build: Not For The Purists.

    Yeah, I've driven a CJ2A and a CJ5 with 11" drums and they will put you through the windshield. Especially with no seatbelts. I've...

    Jul 26, 2024 at 12:44 PM

  4. Stakebed liked Dne007's post in the thread 1963 Dodge Dart !!! Wahoo!.

    I want to say DocMCg (the Forabodies forum) saved the day on the rear main oil seal retainer! ;) I'm so pleased! In the meantime, the...

    upload_2024-7-25_16-30-47.gif Jul 26, 2024 at 12:14 PM

  5. Stakebed liked duffer's post in the thread Body Lift.

    I just purchased a stick of 2" soft (40 durometer) polyurethane rod and made my own spacers. To cut to length, I slipped that stuff in...

    Jul 24, 2024 at 8:46 PM
Show older items
New Posts