Did not change the idle mixture screws. They look ok, but what do I know! Brake cleaner or carb cleaner?
I added the "figure 7" piece a month or two ago! There definitely were some alterations at some point, so I don't know if the original figure 7...
Yes, FSM covers that, but I’m still trying to understand it better. This is my first go around. It does stall when I back off the idle stop screw....
[ATTACH] [ATTACH]
I couldn’t say for sure that it is the carb that came with the vehicle originally, but my understanding is that the 225 came with a Rochester 2G....
When I rebuilt my Rochester 2G carb, I found out that metering jets were 54’s. The FSM says it should be 51 from the factory and 49 or 47 if...
What do you mean by symmetric transmission mount?
Here is where I am. I took off the passenger side motor mount and confirmed that I have left and right sorted out properly. I then loosened all...
This is really helpful. Thank you all.
I promise to do better! As you guys know, I am a complete novice, and I haven’t yet done my final brake adjustments/bleed, but to me the brakes...
Here is where I am on this: It is really hard to differentiate the right from left mounted on the vehicle. I loosened up the mounting points,...
OP took yesterday off to eat some turkey! Here is a pic of my proportioning valve. [ATTACH]
I finished all of my electrical, and everything works except my brake light switch. If I jump the terminals, the brake lights come on, so I think...
Separate names with a comma.
