even if i have the larger spindle size?
I see two on their site: fc-150 and fc-170 - do they correlate to shaft size?
maybe saginaw someday, but it's not in the cards this year.
Who makes the best kit to renew my drag links and bell crank (aside from the tapered bearing project). omix, crown, someone else?
I've got the 5 nipple expansion tank (one line from each tank corner, and one line that should run under the hood) but the concept you mention...
hey yall - me again. So I went to fill my tank fully since redoing everything and the expansion tank started spewing fuel everywhere. It seems...
ah crap - totally forget that i haven't found one that includes the fuel nipples along with the unit, so you'd have to drill a new hole just for...
If I were you and you had a 6 hole opening, I'd put a bolt in floatless sender in there and never think about it again.
you could just toss a fuel tank vent on it and see if that helps - it might smell but it'll vent! :)...
Does your tank have any built in vent nipples?
Good call - I'm going to run it as is now with the bolt and O ring and if either fails I'll come up with another plan. I did break another...
I don't believe the OEM senders had a ground tab.
I know the gauge works, so I'm hoping to make this mod without messing up something functional too bad ha!
I do not. It's got the lock ring.
Separate names with a comma.