I bought a Dana 30 with disc brakes, Detroit True Trac and 4;10 gears and did the swap. It was also out of a 1978 CJ. It has been very good in...
I just replaced my original carb with a "restored" one from the Carburetor Center in El Monte CA. Took me months to find one so i bought it....
For what its worth my 67 is original paint and has blank tailgate and stencil 4wheel logo. No back seat so about 10 years ago i found an old...
After the last few years tinkering with my Rochester 2g and 3 rebuilds, the last one done by a professional shop, I decided to just find another...
I have the stock intake but was told that the Holley may not need an adapter? And I just want to replace the Rochester 2 g to something new that...
I'm now considering a carb change since my original Rochester 2G just doesn't seem to take a rebuild to run correctly. How do I choose between...
I think the 33 x 10.5 is the perfect tire size with a 2.5" lift. I think BFG is the only manufacturer for that size but its a good fit for a cj5...
Nice rig. I'm biased. My light switch is actually out on the far left side. Yours looks to be in a different spot. Interesting... Peter
That is how it should be. I think there is also a movement out west to have trail runs with tires sizes no bigger than 33's. I miss the days...
my 67 has green. Did not know blue was ever used..
I vote yes to both ends. I have a powerlock in the rear factory D44. The clutches did wear out and i had to have it rebuilt. I have a Detroit...
Amazing looking jeep. I love the no roll bar windshield down look. With that said some things that look different than my 1967 which has been in...
The Carburetor Factory rebuilt my original factory one. Not sure of the GM numbers on it. I checked the best I could on vacuum leaks and nothing...
Thank you. Yes the engine dies when the screws are all the way in. I have not checked for vacuum leaks so that could be an issue. The Carb...
After a second rebuild by The Carburetor Factory on my Rochester 2G, I continue to have run on and noxious fumes. I have adjusted the set screws...
Separate names with a comma.
