I have a Chiltons manual. Are they any good?
I found it, just needed a flash light. Between the transfer case and the tranny I used almost 2 quarts. Seems like alot!
I found the fill hole for the t-case but the not for the tranny. I read somwhere that they share fluid, is that why it only has the 1 fill hole?
Man thanks so much. I had been typing in 5x5.5 on ebay and could not find anything but the 1.25. I think I'll give these a go. Anyone know what...
I have 32x11.50 tires, what rim size do I need 15x8 or 15x10?
I dont know why I cant find anything but the 1.25" spacers. I have checked all the off road part sites. I want the 1.5 or 2 inch even. Any help...
Yes I saw that you are running 1.5" spacers for a while without a problem. I found alot of th e 1.25" spacers but not the 1.5. I bet the studs...
5/16? The ones I'm talking about are 1" to 2" thick. I would like to get some new wheels also, spacers are about half the cost though. I don't...
I searched and read most all the threads about them but most of them were several yeras old. I like to try and get some new fresh opinions. Even...
Anybody here running wheel spacers? I know that they add more stress to the joints and bearings and what not. Just want to know if anyone has them on?
Hmm I'll have to look for those. They obviously arent like what I'm used to in the way that they go through the mount itself.
Well seems a little loose, like when I hit a bump the body seems to come up and slam back into the frame. Or could this be a really old and worn...
Separate names with a comma.