You know I am not sure what year it was from. Not knowing the newer jeeps I had to look online at replacement parts to see what year it might be....
I have one, happens to be in a '68 as well. I replaced a worn out steering box with this one. Seems to be fine. What would you like to know?
I am a pretty poor mechanic so I am not sure how much help I will be but.... Make sure the basics are right first...ignition system is correct,...
The fuel pump is a dual action pump. The upper portion is the fuel pump and the lower portion is the vacuum pump. Sounds like you have that...
Greeting from a fellow transplanted Montanan to Phoenix
Well I looked at the t-18/d20 combo last night. The input shaft on the tranny is very long, PTO access on the drivers side of tranny, the transfer...
Thanks Timgr, sorry if I sounded curt in my last reply I was in a hurry. Thanks for the info. I hope to see it tonight
No sir. supposedly a t-18 tranny bolted to a dana model 20 transfer case. Not that I need another tranny.
Thanks Nickmil, I am sure I can find one here, I located about four at $100. I looked at one last night and the little support foot on the front...
I do remember that girdle from years ago....I had forgotten about it until you mentioned it. I found an article at jeepsunlimited that mentioned...
I've discussed welding it with a friend who has done some cast iron welding but I am going to try to stay away from it. I hope to find a 20 case...
Ok, I'm learning some things here. Thanks Niickmil. The transfer case came in a packaged deal. I bought a running duantless v6/sm420/novak...
Thanks guys for the quick responses. You’re confirming what I was thinking. Darn, thought I had something special with the big hole 18 case, hate...
I am a long time lurker and finally have a project of my own. I've gained a lot of knowlwdge here and appreciate the work that goes into it,...
Separate names with a comma.