Been running the low gears in the D18 for a lot of years, mileage and wheeling - my experience is they don't get quieter....with the low gears,...
mine is just like Doug's (colojeepguy) posted above
I think it works best if you can get it out past the tire a bit...
What gauge steel would be recommended? Should I run .024 wire instead of .030 or .035? My welding sucks and even if I don't burn holes through the...
Hi Nick - do note that post and project are from a year and a half ago. Feel free to mention to Richard, but in terms of that project, it's long...
I have a 120V MIG - no aluminum spool gun option. In theory the machine could possibly weld a steel tank, but don't think my skills are up to the...
This is what I want to build: [IMG] Originally the filler neck (hose barb style) was going to be welded on - ideally 'over or along' the upper...
I am in the road so don't have access to my info sheet, but the axle shims were pretty easy iirc....i would guess I got the endplay spec from...
I did last year.....I could spend another $700 on fab work for modifying this tank and still come out way ahead. The couple places I found to do...
This tanks inc universal tank is as close to a good fit that I can find and includes baffle, efi pump tray and whatnot, filler in a good spot etc:...
As Joe references, scroll through this thread.... http://www.earlycj5.com/xf_cj5/index.php?threads/155104/
This info is from AA: https://advanceadapters.com/c-jeep-t18 Here is the input shaft info: O.A.L Tooth Jeep Warner Year of Input, Shaft OAL, OE...
Separate names with a comma.
