My story, my 73 came with stock and original everything. I replace with a 2.5 inch black diamond lift kit, and all new ball joints. Also replaced...
Ok, this sounds good. I will see if this works. Thanks All.
Now that sounds like a plan. If all the spring does is hold the pivot ball in place, but I can't get the fork out of the side of the bell housing....
Farmall, this small spring appears to have been inside the bell housing. If I can remember, it attached to the fork and attached to something in...
Ok gear heads, I have searched these threads and I need help. I have a 73 cj-5, with AMC V-8 and t-15 transmission. While driving, the clutch...
Thank you all for your input. I will continue to use my chains and binders, but, after this discussion I may chain a different way. Thank You...
For you folks that transport your jeeps on car haulers, what have you found to be the most secure? :( I have been using g-70 chains and binders...
I went with a Rancho 2.5 because I knew I wanted 31 inch tires. I went from a heavy stock setup to my rancho and my ride smoothed, and it's fun to...
Well I went with a stock clutch from NAPA. It works well on road but slips off road. I have the t-15 and I notice the slipping in high range off...
Yes, I do remember those days. Keep working and soon you will be able to hear the engine rumble. When I was done my re-build, I said " I wish i...
My lugs are even with the outside of the wheel. I could not even start a lug nut on.
Separate names with a comma.