Not sure if it's the same as the setup used in Fords but if it is all you need is a wiring diagram for the donor. There are 2 wires that run to...
There may be enough bite to see it spin with the clutch in that you would never notice with driveshafts in place.
We've got an old rad. shop in town but if I can find a lower left I can work with any top configuration. At times I have had 1 1/2" exhaust bent...
I'm going to try and get out to the junkyard this week if it ever stop raining and see what I can come up with. Problem is most yards deal in...
That was the plan but was hoping for some real world feedback from some people who have done it. Only place I found a new one they wanted $540....
I have done some searching trying to find a junkyard solution for my 68 cj5 4 cylinder and it seems like everything I read is geared towards the...
I just had to tear my switch totally apart and clean the contacts and the switch worked just hanging in my hand but the indicator uses the switch...
I like it. Looks appropriate and sets it apart from everybody else.
No problem.
Don't know if the carb is salvageable or not. He told $50 on intake and wouldn't think that much more on carb if you wanted it. Only unknown is...
I got a couple pictures of the head area. Let me know if this helps.[IMG] [IMG] [IMG]
This is from the state website. Section 3 spells out the issues with non operational being branded offroad use only and then you have to try and...
In order to take in for vin inspection here it has to be "road worthy" or they will issue a title stamped off road use only. Read that on the DMV...
Separate names with a comma.