Joe, about 10 years ago, I was in the same position as you are now. Over the years, I've done a ton of mods too numerous to list and have a fairly...
Don't bother with clamps - just tack weld the angle to the tube. You might also want to weld a couple of tabs to the angle iron that can be used...
Sorry. I meant when the canoe is on the rack.
Attaching the front rack to the windshield frame sure would be a lot easier but you'll lose the ability to drop the windshield down.
Id look forward to meeting you !:beer:
I didnt really need a canoe but it gave me an excuse to glue up something else for the 55 ;)
Here's an overall view [IMG]
Bought a 14' canoe and didnt want to lay it on the Bikini top. Glued together some 1/2 " pipe along with drilled plates so it can be removed to...
How many pins on the module ? What is the application for the HEI ? ( Is it for a vehicle that had a computer ? ) I mentioned in an earlier post...
On my 55, I just used two grade 8 bolts to make it " permanent " I'm not familiar with the system on a 74. Might be able to bolt two pieces of...
Don't know if this will help and don't remember the specifics but: After installing the 4.3 with an new HEI, I also had no spark. After testing...
Nice job. Great example of do it once and do it right.
A GOOD QUALITY wire stripper tool sure helps out. Small ( 3/8" ?? ) wire loom is sometimes hard to find but cheap and good to have on hand....
Now would be a good time to add a receiver hitch, recovery points etc. Attachment points for custom bumpers ? A welded bolt up front makes a good...
Separate names with a comma.
