-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
dnb71R2's Recent Activity
-
dnb71R2 liked Tralehead's post in the thread Dana 25 Front Axle Overhaul.
No. But just leave them at 80 unless you're taking them off to do the studs. Don't forget Loctite blue when you replace. BTW, there's...
Dec 13, 2024 at 2:48 AM -
dnb71R2 liked Jw60's post in the thread WTB Junk Overdrive.
Step 1 in preparing a good meal: Spill The Beans.
Dec 12, 2024 at 3:29 PM -
dnb71R2 liked timgr's post in the thread T15 To T18 Tcase Shifter Measurements.
The '79 CJ-5 T-18 should be a little shorter than the '71-75 CJ-5 T-18, since the '79 uses no adapter plate. My suggestion is to...
Dec 12, 2024 at 12:31 PM -
dnb71R2 liked duffer's post in the thread Dana 25 Front Axle Overhaul.
If you have access to a lathe and a good carbide bit, you can just set the OD and crank right through all of the button heads without...
Dec 12, 2024 at 12:30 PM -
dnb71R2 replied to the thread Dana 25 Front Axle Overhaul.
I've shared this on a previous thread, but worth repeating...Here's a view of a Dana 30 knuckle and the spindle studs. Some guys have...
Dec 12, 2024 at 12:30 PM -
dnb71R2 liked HellaSlow's post in the thread Dana 25 Front Axle Overhaul.
Sorry I meant to say "Bolts" not "Studs" that I've ordered. I'm getting the aforementioned button head bolts from McMaster Carr: [ATTACH]
Dec 12, 2024 at 12:15 PM
-
dnb71R2 liked duffer's post in the thread Dana 25 Front Axle Overhaul.
I don't think the problem with bolted-on spindles is the length of the bolts. Those can easily be matched to the available threads....
Dec 12, 2024 at 11:40 AM -
dnb71R2 replied to the thread For Sale Dauntless Stuff.
Here's a new one for a good price: All Years Buick Apollo Parts | 354497 | 1962-79 GM; Flywheel Clutch Housing Cover; for 10-1/2"...
Dec 12, 2024 at 11:29 AM -
dnb71R2 replied to the thread Dana 25 Front Axle Overhaul.
The buttonhead bolts are how the Dana30 is designed...might as well go all out and match the later model axle.
Dec 12, 2024 at 11:27 AM -
dnb71R2 liked Keys5a's post in the thread Dana 25 Front Axle Overhaul.
The counterbore is needed for spot-facing when using buttonhead bolts on the inside of the hub. For studs, these are simply threaded in...
Dec 12, 2024 at 11:25 AM
