Mine sticks the float aswell but it sticks open and floods everywhere. Kinda makes it obvious what the problem is :)
On my 2a I think I used a front yoke from a comanche it was the same joint and the same spline just a little longer and tha was with a spring over...
I just spot welded it wherever I could get to mostly from inside the box and seam sealed it all. I guess I kept it inside the brace but you could...
Yup love my little door. I only did it on one side. I just use it for chains and straps works great very convenient
Its only 1/16 so I dont think the hole saw trick would work unless you screwed it down to a plywood guide that had an even smaller hole. And they...
Possibly spark related? Coil or condenser getting hot and loosing spark.
You will find out when you try to put them on. As long as they fit and the ride height is sort of in the middle of their travel. Often times I...
I would think a woobly rotor would just knock back the pads and cause you to need to pump the brakes. Not burn the whole thing up. But it may be...
I have a 10 spline set. They fit 25/27 and 44
I am one to set things on the low side of the preload. Its not really nessesary to have a lot. Putting alot on it really distorts the knuckles and...
The only time i ever retorqued a head I broke a stud. Not doing that anymore
If your old stuff is in good shape and you have a press you can re arch them yourself. Just have to disassemble the leafs and lightly re bend each...
Separate names with a comma.
