This is what I did. Just use a stock cover from a Ford front D44. Don't know if a Chevy or Dodge has the high fill or not.
I've got the wide ratio T-18 and a TeraLow kit and it works great. With 4.56 gears it's about mid-90's crawl ratio which works well even in rocks...
Real bad advice in some states. Here in Colorado, the State Patrol inspects vehicles in the situations described, and could impound a vehicle that...
IMHO, the three speed is worthless for a rig that will see anything more than minimal, extremely easy, offroad use. The gearing is just too high....
I've run both, a lot, and the only significant difference I saw for a trail rig is that the Aussie is a lot noiser than the Detroit. It clicks a...
If you're not going to be airing down to where you need to worry about unseating a bead, beadlocks are a waste of money. They serve a pretty...
Flexplates do wear out, sounds like that's what happened to you. High horsepower/torque is the normal culprit but driving style can accelerate it,...
I'd recommend you throw the revolvers into the closest trash can and stick with regular shackles. The revolvers unload at unpredictable times and...
I'm running 35's with 4.5" of lift. Had to cut the rear fenders, but the fronts seem to be OK so far. It may change when the springs break in.
Why not just rotate the rear diff and install a CV rear shaft? It's way cheaper than a high-9 rear and works just as well. D44 disk brake kits...
One thing to note about the connectors with adhesive, they're incredibly expensive compared to plain (non-jacketed) connectors and weatherproof...
It is amazing how many of the stock connectors are actually available through Napa, Del City, and Centech, but you may never find them by...
If you want to mix and match masters and slaves, you need to dig around the web and get familiar with basic hydraulic power transfer. You need to...
It's you Jeep, do whatever you want to do. Just keep in mind that original sheetmetal is getting hard to find. If you want to hack something up, I...
If you're happy with the way it performs now, going to 31X10.50's won't make any difference.
Separate names with a comma.