1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by 2SERIUS

  1. 2SERIUS
    Post

    More Dash and Steering Column Questions

    If all new components, I think a clean/original looking conversion will cost $750-$1000 and take a bunch of time to do right.
    Post by: 2SERIUS, Feb 18, 2006 in forum: Intermediate CJ-5/6/7/8
  2. 2SERIUS
    Post

    More Dash and Steering Column Questions

    Thanks Norco...please forward any existing photos or future ones for reference. I might have misspoke about "total" restoration...we plan to make...
    Post by: 2SERIUS, Feb 17, 2006 in forum: Intermediate CJ-5/6/7/8
  3. 2SERIUS
    Thread

    More Dash and Steering Column Questions

    Good Evening All, We are just about ready to disassemble our 74 CJ-5 for a total frame-off paint/resto. All the mechanicals have been worked...
    Thread by: 2SERIUS, Feb 17, 2006, 6 replies, in forum: Intermediate CJ-5/6/7/8
  4. 2SERIUS
    Post

    Need Some Help On Production Date

    Our 1974 CJ was built in November 1973 with sequential number 25175. The VIN Decal says Built by Jeep Corporation, is 1.8" tall, 4.5" wide,...
    Post by: 2SERIUS, Feb 16, 2006 in forum: Intermediate CJ-5/6/7/8
  5. 2SERIUS
    Post

    Spare tire carriers

    I think the original side mount is cool, but only if you are going to have an original size spare. I bought the swing away from 4WD Hardware. It...
    Post by: 2SERIUS, Jan 27, 2006 in forum: Intermediate CJ-5/6/7/8
  6. 2SERIUS
    Post

    bout to lift it

    Please forgive an ignorant question: Are the coil springs and links shown in the picture correct for a 1975 CJ lift? I think there should be four...
    Post by: 2SERIUS, Jan 26, 2006 in forum: Intermediate CJ-5/6/7/8
  7. 2SERIUS
    Post

    swapping a 304 to a 360

    I'd keep the 304. They are getting rare. You can get a fair amount of power out of them with an intake, carb, cam, header setup. Only drawback...
    Post by: 2SERIUS, Jan 24, 2006 in forum: Intermediate CJ-5/6/7/8
  8. 2SERIUS
    Post

    body lift question??

    I'd definitely replace the bushings while I was in there, if they were original. Thanks for the info on the kit. I've put in several body lifts,...
    Post by: 2SERIUS, Jan 24, 2006 in forum: Intermediate CJ-5/6/7/8
  9. 2SERIUS
    Post

    body lift question??

    Is the 1" kit you are using a spacer kit or is it a polyurethane mount kit? I'd like to find a 1" mount kit for mine. I think a 1" kit shouldn't...
    Post by: 2SERIUS, Jan 22, 2006 in forum: Intermediate CJ-5/6/7/8
  10. 2SERIUS
    Post

    82 CJ5 - More questions

    I know the T176 will bolt to a Dana 300 because I had an 81 CJ-5 with that factory setup.
    Post by: 2SERIUS, Jan 21, 2006 in forum: Intermediate CJ-5/6/7/8
  11. 2SERIUS
    Post

    Black Diamond or 4wd Hardware

    I bought and installed the 4wd 2.5" kit a year ago instead of the Black Diamond because they were out of the Black Diamond at the time. I had to...
    Post by: 2SERIUS, Jan 21, 2006 in forum: Intermediate CJ-5/6/7/8
  12. 2SERIUS
    Post

    '73 wiring diagram?

    Here they are. I had to shrink them to 640 x640 to meet attachment requirements. Good Luck!
    Post by: 2SERIUS, Jan 21, 2006 in forum: Intermediate CJ-5/6/7/8
  13. 2SERIUS
    Post

    '73 wiring diagram?

    I tried attaching the scanned files, but apparently they are a little too big as a JPEG. If I shrink them, they may not be as legible. Any tips?...
    Post by: 2SERIUS, Jan 20, 2006 in forum: Intermediate CJ-5/6/7/8
  14. 2SERIUS
    Post

    steering column swaps?

    Re: steering couloumn swaps? I was about to ask the same question regarding column swaps. We have a 75 CJ-5 with a 304 that we are restoring....
    Post by: 2SERIUS, Jan 20, 2006 in forum: Intermediate CJ-5/6/7/8
New Posts