probably easier to cut to length DOM and weld on some pre-machined L & R threaded ends. I've done that for control arms/links and steering for a...
similar approach here, use a different style latch that has some adjustability to it. I also put some 1/4" aluminum platebehind the dash where...
I would try something thinner than engine oil, even something like WD40 or 3-in-1, just something thin to slam into the joint to get things...
the grease hammer tools work pretty well if you use them with a lighter weight oil. then flood them with new grease. :)
I ended up using small screws and nuts to hold mine in. Doesn't look factory, but it works. I really didn't have any luck with the welting tool...
on the note of being one of the slower vehicles on the road, I have been using slightly convex side mirrors on almost all of my vehicles, they...
I've not had a problem going 55-60 on interstates. Sure a lot of people pass you (almost everyone), but you'd be surprised the number of cars...
that's exactly what the skids/armor are supposed to do :) If you don't have one yet, look at buying or making one for the steering box....
any time I hear "side pipes" I can't help but think of Bill Cosby talking about when he bought a cobra from Carol Shelby. him talking about the...
Yeah, assembling the tub just out there on the floor with no jigs or anything, I wonder how straight/accurate they are? I mean... I guess the...
you can pry up the body (or use a jack) and put shims or whatever in there.
you can try the old trick of placing the palm your hand over the carb opening (sealing it off) while the engine is running at a higher RPM,...
you probably won't get all of the fuel out of the tank unless you have a small sump at the bottom where you put the drain, but you'll definitely...
those are nice photos :)
Separate names with a comma.
