Ilike the pro comp lift 4 inch, it will clear 35s and with a little trimming would be very clear at full flex. Great on road drive great off road...
To give you an idea I am an avid rock crawler in Moab Ut. and I wheel on a budget, I did 1 peice axles in my 20 and a spool. I also reinforced...
I just did this with 2.5 lift springs, mock the axle in place and put it a couple degrees below perfect alignment, this will allow the unavoidable...
What is the difference between a 42 mb and a 45 mb, or did they even make the mb in 45. I am confused because mine is registered as a 45 but is...
I ran a lock-rite and spun it, so I welded it. It now is much more solid no moving parts to break, don,t weld the front though having a 100...
Perfect that is exctly what I wanted to know, one more question the ford T-18, how hard is it to et that to bolt in and will the 20 bolt up....
Using a PRO COMP 4 inch lift on my cj-5 I was able to clear 35 inch bfg's with no problem but a one inch body made me feel more comfortable...
It sounds like your mind is made up but you might rethink using that t-150 behind a V8 I ran one behind my 304 with less horse power than you and...
Thank you you have been most helpful, the reason I bring it up is I just bought an 80 cj-5 and it came with the T-150, and this other one and I...
Does Anyone Know Much About The T-170, It Is The Aluminum 4 Speed Put In The 1980+ Jeeps. Is It Strong Or Reliable Plus Will It Bolt Right Up To...
In My Experience For 33 Inch Tires With The Gutless 3 Speed, 4.56 Gears Is Perfect For Good On Road Speed And Enough To Pop A Willie In Low Range....
Rancho Has Impressed Me With Weight Stability While Still Riding Nice And Performing Very Well Offroad. Its Been Very Reliable And When I Was...
I Just Did A Soa On My 76 And Used 2.5 Rancho Springs, My Biggest Issue Has Been Mounting Shocks So It Doesnt Limit My Travel Also I Have Some...
Separate names with a comma.